| Re: high nitrate/nitrite |
Subject: Re: high nitrate/nitrite by Sayyad on 23/12/2013 13:26:48 Hello again and thank u for the reply. i did a 30% water change this morning, added the stabilizer and about two hours later these are the readings: Cl= 0 PH= 6.8 Kh= 6هd. - I dont know what that is! GH= ok NO2= 5 mg/l - in the Red, but lower than before NO3= 100 mg/l. - in the Red but also lower than before I added stabilizing fluid as per directions, I think to enhance good bacteria counts, also I added Prime as recommended per water change to remove Ammonia and Chlorine. Temp is about 26 Deg. Cent., and water is crystal clear. Dont have an ammonia tester, but I recognize that Ammonia is high since Nitrate and Nitrite are high. Seems that the Nitrogen Cycle is moving but slowly, Not sure! Regards, |